Galil AR/ARM Barrel, 18" Long, 1 in 9 Twist, .5.56X45 NATO, In the White US 922(r) Compliant Part, *NEW*

*NEW* US production barrel for the Galil AR /ARM rifle, 18" long, 1 in 9 RH twist rate, .223/5.56X45 NATO, in-the-white.

Sold individually.

Perfect for replacing an old, worn out barrel!
These are 18 inches long, profiled for GALIL AR/ARM rifles and threaded at the muzzle to accept the factory flash hider (13x1mm RH).
The gas port is not drilled, the notches for the front sight/gas block are not cut.
The extractor clearance cut and notch for the lower handguard retainer plate have been made.
Handguard cuts may or may not be made on both the upper and lower half of the barrel, not affecting performance.
1/9 RH twist rate balances heavy and light grain bullets.
These barrels are US made, and count as one part toward 922(r) compliance.

Parts must be inspected and tested by a qualified and competent gunsmith or armorer before use in a firearm.
Not all firearm parts are interchangeable; use of new parts without proper knowledge could cause a firearm to malfunction and cause property damage, injury or death.